Black BLK-DH201600D Uživatelský manuál Strana 49

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 105
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 48
43H.264 DVR User Manual
SECTION 7: FIRMWARE UPGRADE
SECTION 7
Firmware Upgrade
The rmware installed in your DVR will probably never need to be changed. If new rmware is released, however, upgrading the
rmware in your DVR may be recommended by Supercircuits.
The general instructions for upgrading rmware are included in this section. For additional information, specic instructions, and to
obtain a rmware upgrade le, contact Supercircuits Support at: 1.800.335.9777.
To upgrade the rmware in your DVR:
1. Obtain the rmware update le from Supercircuits Support. The rmware upgrade le is usually named:
apph_xxxxxx.bin” where “xxxxxx” represents the revision level of the rmware.
2. Plug a USB ash drive into a PC and format it for FAT32, if necessary.
3. Create a new directory on the ash drive named “upgrade.
4. Copy the rmware le to the upgrade directory on the ash drive.
5. Disconnect the ash drive from the PC and plug it into a USB port on the DVR.
6. Open the SETUP menu on the DVR, then open the SECURITY tab.
7. Select the User Password button.
Zobrazit stránku 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 104 105

Komentáře k této Příručce

Žádné komentáře