Black BLK-HD4E Uživatelský manuál stáhnout pdf (Strana 20)

SECTION 2: HARDWARE OVERVIEW AND SETUP

6. Plug a SATA data and power cable assembly into the mating connectors on the back of the DVD-R/W drive. Ensure the

connector is fully seated.

SATA data and

power cable

7. Position the DVD-R/W drive in the optical drive bay as shown below. Secure the drive to the chassis with four screws through

the mounting brackets, two on each side. Use black pan-head course-thread screws provided. Tighten the screws until snug.

DVD-R/W drive in optical drive bayScrews

Screws

8. Plug the SATA data cable (blue cable) into the SATA1 connector on the PC board, then plug the SATA power cable into one of

the SATA power connectors on the PC board.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 123 124

Žádné komentáře

Black BLK-HD4E Uživatelský manuál Strana 20